AudioControl D-5.1300 5-Channel Car Stereo Amplifier DSP Digital Sound Processor

$899.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store stereo-needs
(93659) 99.5%,

Location: Murrieta, California
Ships to: US,
Item: 156432360381

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
AudioControl:AudioControl
AudioControl D-5.1300:AudioControl D-5.1300
MPN:D-5.1300 D5.1300
Channels:5

Brand New AudioControl D-5.1300 5-Channel Amplifier with DSP Digital Sound Processor COMES WITH 3 YEAR WARRANTY NOT RETURNED ~NOT REFURBISHED ~ BRAND NEW FACTORY SEALED Audio Control D-5.1300 5-Channel Amplifier with DSP Digital Sound Processor A full-system amp, plus digital signal processingTwo keys to unlocking great sound in a car stereo system are extensive control and serious power — and this amp’s got them both. For control, AudioControl’s D-5.1300 provides an expansive digital tuning workstation with a connection to your laptop. For power, this five-channel amplifier puts out 100 watts RMS to four channels and up to 500 watts RMS to a sub. If you’re into mega-power, competition-type systems, you could bridge this amp to 3-channel mode and drive a couple of high-performance components with 400 watts RMS each while powering a sub with 500 watts RMS — that’s 1300 watts in total.Computer-controlled digital signal processingYou won’t find any knobs on the D-5.1300 — you make adjustments and save settings via your laptop (PC or Mac). AudioControl’s Smart-User DSP software package includes 12 or 24 dB/octave Linkwitz-Riley crossovers, 30-band equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, AccuBass™ bass correction, and real-time analyzers (RTA) for the inputs and outputs so you can visually confirm the improvements in the sound.It’s made to work with a factory radioEight active speaker-level inputs allow you to connect this amp to almost any factory system, even ones that have separate pre-filtered, time-aligned, and amplified signals going to separate factory speakers and tweeters. The D-5.1300 sums them into one smooth, unified signal for you to balance, align, and tune for your high-performance speakers. AudioControl’s Great Turn On (GTO™) signal-sensing circuitry turns the amp on automatically whenever it senses an incoming signal, so you won’t have to run a separate turn-on lead back to the receiver.Active controls for active systemsThis amp will work well, for example, with a 3-way system that uses tweeters, midrange speakers, and a subwoofer. Highly adjustable crossover networks let you set high-pass, low-pass, and bandpass filters so each driver gets only the frequencies it was designed to play. AudioControl’s AccuBASS® circuit ensures maximum bass performance, even if you’re connected to a factory radio that normally turns down the lower frequencies as you turn the volume upConvenient featuresOnboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional wired remote can get assigned to each and every channel pair so you can control volume from the front seat. Product highlights:5-channel car amplifier with digital signal processing100 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms200 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms400 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohmsClass D amp technologyMILC™ (Maximum Input Level Control) LED optimization and clip indicatorsstereo/mono switch on channel pairsTuning Controls:Ch 1/2:variable high-pass filter (300-3,000 Hz) or low-pass (30-300 Hz), 12 dB/octavefront high input level control — when using amplified factory tweeter wiringCh 3/4:variable high-pass or bandpass filter (HP: 30-300 Hz; Bandpass: 500-5000 Hz, 12 dB/octave)Ch 5:variable low-pass filter (30-300 Hz, 12 dB/octave)AccuBASS® circuitry for improved bass response30-band graphic EQ, parametric filters, phase correctiontime delay/alignment for inputs and outputsRTA (real-time analyzers) for inputs and outputsOther Features:inputs: 6 preamp-level and 8 summable speaker-levelGTO™ (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level inputoptional wired remote level controller availablefuse rating: 30A x 4wiring and hardware not included with amplifier4-gauge power and ground leads recommendeddimensions: 11-15/16″W x 2-1/8″H x 8-1/16″Dwarranty: 3 years60-day returnsMFR # D-5.1300Item # 161D51300 What’s in the box:AudioControl D-5.1300 owner’s manual5-Channel DSP amplifierFour 30A ATO fuses (installed)10′ USB cable (type-A on one end / micro-B on other end)2.5mm Allen keyQuickstart guideProduct testing certification Brand New 3 Year Warranty Comes with 3 year StereoNeeds warranty. For any warranty issues please contact us. Our company has been in the stereo business for over 20 years We have sold on EBAY since 2000, so please bid with confidence. We have a 99% positive feedback rating on EBAY! We have very prompt shipping. We will gladly answer any technical questions you have. If you have any questions, problems, warranty issues, or concerns please contact us.

Frequently Asked Questions About AudioControl D-5.1300 5-Channel Car Stereo Amplifier DSP Digital Sound Processor in My Website

giainganvon.com is the best online shopping platform where you can buy AudioControl D-5.1300 5-Channel Car Stereo Amplifier DSP Digital Sound Processor from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling AudioControl D-5.1300 5-Channel Car Stereo Amplifier DSP Digital Sound Processor on giainganvon.com?