DC 5V 12V 24V Delay Turn On/off Timing Cycle Timer Relay Signal Trigger Switch

$8.91 Buy It Now or Best Offer
free,30-Day Returns

Seller Store happy_guys
(13082) 98.2%,

Location: 深圳
Ships to: US,
Item: 325979009526

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Time delay relay switch:Time delay relay switch
Country/Region of Manufacture:China
Item Height:26mm
Item Width:48mm
Current Type:DC
Type:Multifunction Time Relay Module
Features:Timer
MPN:Does not apply
Power:DC 5V/12V/24V
Unbranded:Unbranded

Welcome to Happy_guy You may also like, welcome use “Add to basket to buy” Description Welcome to our store: DIY_happy Tips: If you need Large quantity, please contact us, we can wholesales. Specification: Instructions for use: Setting of working parameters: Hold down the SET button without letting go, the display will show P-XX after 0.5 seconds, press ▲ and ▼ to change the working mode. After selecting the working mode, short press the SET key to enter the A time setting, the screen displays Axxx, press the ▲ and ▼ keys to modify the A time parameter, press the ↑ and ↓ keys shortly to add or subtract 1, long press to quickly add or subtract 10, press The S key can set the position of the decimal point. After setting the A time, press the SET button to set the B time, the screen displays bxxx, press the ▲ and ▼ keys to modify the B time parameter, press the ▲ and ▼ keys to shortly press to add or subtract 1, long press to quickly add or subtract 10. Press the S4 key to set the position of the decimal point. After setting the B time, press the SET button again to enter CXXX, press the SET button again to enter dXXX, and press the SET button again to exit the setting state and save all parameters. The above settings such as B time or other time has no effect, no need to set, press SET to skip. The meaning of the decimal point position: Ax.xx The decimal point is in hundreds, and the time range is 0.01~9.99 seconds Axx.x The decimal point is in the tenth place, and the time range is 0.1~99.9 seconds Axxx. The decimal point is in the ones place, and the time range is 1~999 seconds Axxx has no decimal point, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the S key to turn off the display, and then press it again to turn it on again. Operating mode P-00: Invalid (skip)P-01: The relay is disconnected after power-on or triggered, and the relay is closed after a delay of time AP-02: Closed after power-on or triggered, the relay is disconnected after a delay of time AP-03: Jog mode, pull-in with signal, disconnect without signalP-04: Self-locking mode, the relay state flips once after each triggerP-05: After triggering, the relay pulls in, and stops after a delay of A time. Repeated triggering is not allowed during the delayP-06: After triggering, the relay is closed, and it will stop after a delay of A time. The trigger will be repeated during the delay and the timing will be restarted.P-07: After triggering, the relay is closed, and it will stop after a delay of A second. Repeated triggering during the delay period, the time will accumulateP-08: After triggering, the relay is closed, and it will stop after a delay of A second, and it will stop immediately after triggering again during the delay.P-09: After triggering, the relay is closed. After the signal disappears, it will delay for A second to stop, and the trigger will restart during the delay.P-10: After power-on, pull-in time A, disconnect time B, infinite loopP-11: When there is a continuous signal, pull in A time, disconnect B time, infinite loop, stop immediately after the signal disappearsP-12: Trigger once, pull in A time, disconnect B time, infinite loop, trigger again to stopP-13: The relay is switched on when the power is on, the relay is disconnected after triggering, and the relay is switched on after the delay time AP-14: There is a continuous signal, the relay is closed after the time A exceeds, and the signal disappears and the relay is disconnectedP-15: The relay with continuous signal is disconnected, and the relay is closed after the signal disappears for more than A timeP-16: When there is a continuous signal for more than A time, the relay is closed, and after the signal disappears for more than A time, the relay is disconnectedP-17: The relay is closed after a continuous signal exceeds the time A, and after the signal disappears, the relay is disconnected after the continuous signal exceeds the time A againP-18: Trigger, the relay will be closed after time A is exceeded, and triggered again, the relay will be disconnected after time A is exceededP-19: There is a continuous signal that the relay pulls in for A time and then stops, and then if the signal disappears, the relay pulls in for A time and then stopsP-20: There is a pulse signal (rising edge or falling edge), the relay stops, and there is no pulse signal, the relay pulls in after a delay of A time [continuous high level or continuous low level is considered as no pulse]P-21: After power-on, the relay will be closed after the delay time A, and stop after the time B is closedP-22: After triggering, the relay will be closed after delaying time A, and stop after closing time BP-23: There is a continuous signal and the relay is closed after the time A is exceeded, and it stops after the time B is closedP-24: After triggering, the relay stops after A time, and then counts B time after it stops. It cannot be triggered again within A+B timeP-25: After triggering, the relay stops after closing A time, timing B time, and then closing A time and then stop. During this time, it cannot be triggered repeatedlyP-26: Counting mode, rising edge trigger, every time a rising edge is detected, the value is +1, the maximum count is 9999, the maximum frequency is 20Hz, short press the S1 key to clearP-27: Counting mode, falling edge trigger, each time a falling edge is detected, the value is +1, the maximum count is 9999, the maximum frequency is 20Hz, short press the S1 key to clearP-28: Counting mode, rising edge trigger value +1, maximum 9999, MAX 20Hz, when the count value is equal to the d parameter, the relay is closed and the program stops. Short press S1 button at any time to resetP-29: Counting mode, rising edge trigger value +1, maximum 9999, MAX 20Hz, when the count value is equal to parameter d, the program will automatically reset after the relay pulls in for A time. Short press S1 button at any time to resetP-30: After the trigger, delay time A and then pull in (falling edge trigger), pull in after B time, disconnect, count once, stop when the number of counts reaches the d parameter, if there is a trigger (rising) during the A time delay Edge) will resetP-31: After power-on, it will count down the time c and then automatically trigger. After the trigger, it will be closed after a delay of time A, and disconnected after the time of pull-in B. It will count once, and a new cycle will be restarted when the number of counts reaches the d parameter. Package Include: Relay Switch x 1pcs Payment We only accept payment via Paypal. The buyer is responsible for any applicable import duties and local taxes. Usually there’s no any charges for small parcel. But please verify with your customs before making your purchase. Delivery details The items will be shipped within 1~2 working days after your payment is received and cleared.(excluding Saturday, Sunday & Holiday) All items will be shipped to your Paypal address, so please make sure to provide us with the correct, precise, detailed shipping address. The Delivered time to USA buyer is about 7~20 days, other country about 15~35 days delivered. Notes: pls contact us if you need need trackable or express shipping service. Terms of sales All the items will be tested before shipping. Buy them with the confidence! We maintain the excellent service standards and strive for 100% customer satisfaction and Positive feedback. If you have any problem, please do feel free to contact us before leave Neutral or Negative feedback, so that we can satisfactorily address your concerns. Return We afford all cost if it’s our fault. Exchange or refund. Contact us We strive to provide you with the best service, reply your question within 24 hours. Business time: 9:30~21:30 (GMT+8) exclude the weekend and holidays. Contact us

Frequently Asked Questions About DC 5V 12V 24V Delay Turn On/off Timing Cycle Timer Relay Signal Trigger Switch in My Website

giainganvon.com is the best online shopping platform where you can buy DC 5V 12V 24V Delay Turn On/off Timing Cycle Timer Relay Signal Trigger Switch from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling DC 5V 12V 24V Delay Turn On/off Timing Cycle Timer Relay Signal Trigger Switch on giainganvon.com?