DC 5V 12V 24V Multi Function Delay Relay Trigger Cycle Delay Switch Timer Module

$4.45 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 145000981421

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Unbranded:Unbranded
MPN:Does Not Apply
Type:Time Delay Relays
Features:Indicator Light, Timer
Application:Automotive, Branch Circuit, Charging/Power, Control Equipment Panels, Commercial, Electrical Wiring, Electronics
Current Type:DC
Maximum Amperage:10 A

eBay

DC 5V 12V 24V Multi function Delay Relay Trigger Cycle Delay Switch Timer Module

High-quality materials, exquisite craftsmanship, safe, reliable and durable, long service life, complete specifications, convenient and flexible use, and better cost performance.

The multi-functional relay control module is designed for users with a wide range of needs, using a microcontroller as the main control unit, with 32 preset functions, and the user can use the specific functions according to actual needs. The microcontroller is used as the main control unit.

It can be used for pump control, motor control, lamp control, solenoid valve control, etc.

Features:

The new upgrade, the module function has been increased to 32, to meet more application needs.
The power supply anti-reverse connection function will not damage the module due to wrong power connection.
Timing accuracy to 0.01 second timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional
Low power consumption settings, you can turn off the display area.
with anti-reverse connection and anti-surge voltage protection

Product Parameters:

Working voltage: DC 5V 12V 24V
Output power: DC or AC load within 10A
Time range: 0.01S-9990 minutes adjustable
Signal support: switching signals or high and low level signals
Quiescent current: 20mA
Working current: 60mA
Operating temperature: -25°C – 85°C
Power-off memory: yes
Application areas: motors, motors, LEDs, lamps, pumps, solenoid valves, etc.

Tips:

Please select the required voltage version (according to the above relay identification difference, the relay is 5V instant 5V version) to avoid wrong purchase.
The relay output is a passive contact without current output, which controls the on-off function of a line.
Please input the trigger voltage strictly according to the selected version.

Instructions for use explained (Working parameters setting instructions):

Press and hold the K1 key, the display will show P-xx after 2 seconds, press K2 and K3 to change the working mode, after selecting the working mode, press K1 key to enter the A time setting, the display will show Axxx, at this time press K2 and K3 keys to modify the A time parameters, K2 and K3 keys short press plus or minus 1, long press fast plus or minus 10, press K4 key to set the position of the decimal point. After setting the A time, press K1 again for B time setting, the screen displays bxxx, at this time press K2 and K3 to modify the B time parameters, K2 and K3 short press plus or minus 1, long press fast plus or minus 10, press K4 to set the position of the decimal point. After setting the B time (if the mode has the C cycle times parameter) press K1 again to set the C cycle times, the screen displays Cxxx, at this time press K2 and K3 to modify the C cycle times parameter, K2 and K3 short press plus or minus 1 and long press fast plus or minus 10. After setting, press K1 one last time to exit the setting state and save all parameters.

Operating modes (32 types):

P-11: Point-activated mode, with signal to close, without signal to open.
P-12: Self-locking mode, relay status flips over after each trigger.
P-13: After triggering, the relay will be activated and disconnected after a delay time of A; the trigger is not valid during the delay time.
P-14: When triggered, the relay is activated and disconnected after a delay time of A; the trigger is retimed during the delay time.
P-15: When triggered, the relay is activated and disconnected after a delay of A time; the trigger is timed out during the delay.
P-16: When triggered, the relay is activated and disconnected after a delay of A time; trigger reset during the delay (relay disconnected)
P-17: After triggering, the relay opens during the signal duration, the input signal disappears, and it opens after a delay time of A; during the delay time the relay is triggered again and remains open. The relay remains open during the time delay and the timing stops until the last signal disappears and is disconnected after a time delay of A.
P-18: Immediately after energisation, the relay is activated and disconnected after a delay of A seconds; until the next energisation.
P-21: Give a signal, delay A and then the relay will close.
P-22: Give a continuous signal, after a time delay of A, the relay is activated; if the signal disappears, the relay is disconnected.
P-23: Signal disappears for more than A time, relay opens; with signal, relay opens.
P-24: Given continuous signal, after A time, relay active; signal disappears after A time, relay open.
P-25: given continuous signal, after A time, relay opens; given continuous signal again, after A time, relay opens Relay disconnected
P-26: given signal, relay opens after A time; after signal disappears relay closes again after A seconds and stops
P-27: With a pulse signal (rising or falling edge) the relay breaks, without a pulse signal the relay is delayed for A time and then closed (a continuous high or a continuous low is considered as no pulse).
P-28: After power up, the relay sucks in after a delay of A time until disconnection.
P-31: After power up, the relay sucks in A time and breaks B time, infinite cycle; power off stops.
P-32: With a continuous signal, the relay is activated for A time and disconnected for B time in an infinite cycle; the signal disappears and the cycle is terminated.
P-33: Given once, the relay will open for A time and close for B time, infinite cycle; given again, end cycle.
stop the cycle.
P-34: After power up, after delay A time, the relay is activated, after activated B time, it is disconnected.
P-35: Given once, after a delay of A time, the relay is activated, after B time it is disconnected.
P-36: Give a continuous signal, after A time delay, the relay is activated, after B time it is disconnected; the signal disappears, the clock is cleared and the relay is disconnected. The signal disappears, the time is cleared and the relay is disconnected.
P-37: With a signal, the relay is automatically disconnected after A time and then timed for B time after disconnection, within A+B time. Signal trigger is not valid.
P-38: With signal, relay automatically disconnects after A time, after disconnection and after B time, again after A automatically disconnects after time A.
P-41: No action with signal; signal disappears and melts; relay absorbs and delays A time and then disconnects.
P-42: signal disappears, relay absorbs after delay A time; relay disconnects after delay B time again.
P-43: Signal disappears, relay opens after time delay A; relay opens after time delay B.
P-44: After power up, relay is activated for A time and disconnected for B time; after C cycles the relay is disconnected and stops.
P-45: No action after power up; after giving a signal, the relay is activated for A time and disconnected for B time; after C cycles the relay is disconnected. If a signal is given, the relay is activated again.
P-46: After giving a signal more than A times, the relay is activated; it remains activated; it stops after a power failure.
P-47: After giving a signal more than A times, the relay is activated; after B time it is activated, it is disconnected.
P-48: After giving a signal more than A times in succession within C time, the relay is activated and stops after B time.

–
Exact dimensions can also be viewed in the photo gallery.

– You can find more products in different material, type, color, sizes, quantity and shapes in our shop If you have special needs, please contact us, we can customize according to your needs!

Note:

– Please allow minor errors due to manual measurement. Thank you for your comprehension.

– Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.

Package included : ( According to your choice )

Frequently Asked Questions About DC 5V 12V 24V Multi Function Delay Relay Trigger Cycle Delay Switch Timer Module in My Website

giainganvon.com is the best online shopping platform where you can buy DC 5V 12V 24V Multi Function Delay Relay Trigger Cycle Delay Switch Timer Module from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling DC 5V 12V 24V Multi Function Delay Relay Trigger Cycle Delay Switch Timer Module on giainganvon.com?