Kingsley Hot Stamping Foil Special Effects – 3" x 95' – 3 Roll pack + Canister

Kingsley Hot Stamping Foil Special Effects - 3

$29.97 Buy It Now or Best Offer
free,30-Day Returns

Seller Store dckelly
(3456) 98.9%,

Location: Caledonia, Michigan
Ships to: US,
Item: 254746012984

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
MPN:Does Not Apply
Size:3 inches x 100 feet
Core:1/2 inch
Unbranded/Generic:Unbranded/Generic

STOP!!! This package includes a canister holder for the foil feeder mechanism on a Kingsley machine. The cost of the canister is $6.00 ($8.99 if purchased separately). But if you already have a canister replacement tube for your foil feeder, or you aren’t using a Kingsley machine, or you don’t plan to use this foil in any foil feeder, save your money and order this foil without the canister, at eBay item number 254803304134.OR, if you need just a canister, order it eBay item number 251440623971. For more information about the canister, see “Canister Replacement Tube” below.* Mosaics and Rainbows (virtually all foils with designs) are a little pricier than single colors foils, but I have been able to keep the price down. This foil is hand-rolled down, from large master rolls, to 95 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet; ours are 95 feet long. Also, foil rolls that are 200 feet long, or longer, will not fit the canisters with the auto feeder. ************************************************************************************************************************************* ABOUT INTERNATIONAL ORDERSI receive many orders from across the waters, and I really appreciate every one of them. But after these shipments leave the United States, I cannot be held responsible for the delivery. The USPS assures delivery of an international packages to the country of destination, so when the tracking information says “Processed through sort facility” at Miami, New Orleans, New York, San Francisco or Los Angeles, it means that the package has been handed over to the postal system of the destination country. Traditionally, I can gather no more information between the time of that handoff and the time the package is ultimately delivered, at which time tracking gives a notice of delivery. But what that country’s postal system does with the package can vary greatly. Some packages go to the country’s customs office, some are held at who knows where for an indefinite length of time and some are delivered immediately. Recently, I have noticed that more details about that country’s handing of the package has been included in the tracking information from certain countries, and I assume that this is a trend, and that tracking information will continue to improve. But please don’t hold me responsible for what your country does with the package instead of delivering it timely. From more than 10,000 orders I have shipped, I have received 7 or 8 negative feedbacks, and every one of them has to do with delivery of overseas shipments. Most of them were complaints concerning delivery time, over which I have no control. Two of them gave me negative feedback for non-delivery of the package, which was later delivered, but there was no attempt to correct the feedback. Please don’t treat me this way. When you order from me from overseas, I will ship the product quickly, and eBay will send you a tracking number on shipment day. If delivery seems slow, I will always try to help you get your package, but please don’t give me negative feedback for slow delivery. I didn’t do it. Please be aware that you may have to pay customs fees, but since most of my shipments are small, apparently such fees are not often levied. ********************************************************************************************************************************************************************************** This offer is for three (3) rolls of special effects foils, 3 inches wide, 95 foot long; you may choose any assortment of the 3 styles, along with a canister replacement tube. If you do prefer a special assortment, or if you need the foil rolled on 5/8″ or 1″ cores, please indicate your preferences in a note to me in eBay messaging immediately after ordering, or in Note to Seller during PayPal checkout. If I don’t hear from you the same day, I will ship one each of Oil Slick (mosaic – DK11), Spectrum (DK03) and Jelly Bean (105F). ABOUT THESE ROLLS• Mosaic foil (DK11) is a random multicolor foil, used frequently for names on children’s Bibles; often called “rainbow.” This is a more brilliant foil than regular mosaic foil as there is more of each color before changing to the next color – very striking on children’s Bibles. Kids love it, and it serves many other purposes too.• But “rainbow” is best reserved as the name for spectrum foil (DK03), which shows the true colors of the rainbow in spectral order once every 3 inches.• Jelly Bean (105F – actually is called “Boomerang” by Crown Roll Leaf, but I think it looks more like a pile of jelly beans).• All foil has been re-rolled from large master rolls onto 1/2 inch cores (unless otherwise requested – see Ordering the Right Foil for your Foil Feeding System below) to work on Kingsley, Howard, Jason and most any hot stamping machine. • Beware of purchasing foil on 1 inch core (frequently offered on eBay); foil on 1 inch core cannot be used in the foil feeders of most Kingsley M-50s, M-60s and M-75s. Foil on 1 inch core is generally designed for use on the M101.• This is a constantly revised list and I tweak it frequently. • All rolls are 3 inches wide and 95 feet long, more than twice as long as the old standard 40 foot long Kingsley foil rolls, but for about the same price.• The Infinity Foils numbering system is generally used to arrange by number and color, with supplemental colors from several other sources, including Crown Roll Leaf, whose numbers are included for reference. • Foils from still other suppliers will be substituted occasionally as long as the color matches.• Brilliant foils can also have various finishes. I use the word “shiny” (ya, I know, not too scientific) to refer to the most mirror-like, chrome-like finish. And I also use other terms to refer to several other finishes like “metallic,” “satin,” “dull,” “warm,” “bright,” “light,” “rich,” “less yellow,” etc. For more information, see Important Little Tidbits about Foil and Hot Stamping below.• Special Foils for Napkins & Ribbon – because these materials (substrates) are light weight, most brilliant foil will “pick” them up when imprinted. Having to “knock the napkin off” the foil after each impression defeats the speed advantage of the foil feeder, so Kingsley produced a special quick release foil that will not adhere to the napkin or ribbon; thus the imprinting speed is not hindered. But since the “old” Kingsley foil is no longer produced (I still do collect some of it along), Crown Roll Leaf now produces a quick release foil in at least 6 colors: gold, silver, copper, blue, lavender and black (these foil color numbers end with “K”). They are all matte finishes, and although I have heard rumors about quick release foil in brilliant colors, I still have not found any. CHOOSE ANY 3 FOIL ROLLS FROM THIS LIST OF 5 SPECIAL EFFECT STYLES DK11 – Mosaic (also called Rainbow or Oil Slick) DK03 – Spectrum (true Rainbow, full spectrum every 3 inches) 105F – Jelly Bean (also called Boomerang) DK750 – Duo-Tone Gold 5955 – Duo-Tone Green CX-01 – Clear (transparent) SPECS• For hot stamping at about 250° on most surfaces • All rolls fit our canister replacement tube (included) • Brand new, recently produced, fresh foil • Package of 3 rolls, your choice of any assortment of 5 styles • 3 inch wide x 95 feet long foil on 1/2″ (or 5/8″ or 1″) core • $7.99 per roll • Compare at $15.00 per roll *CANISTER REPLACEMENT TUBE These are brand new rolls of brilliant gold foil, ideal for hot stamping leather and plastic. Plus, it is a 100 foot roll on a 1/2 inch core and will fit most of the canister replacement tubes that have been produced recently. Kingsley produced 40 foot foil rolls in canisters to function with the automatic foil feeding system included in virtually every Kingsley M-50 machine and many M-60 units. Since these canisters are no longer in production, several specially designed tubes have appeared to replace the canisters and allow the automatic foil feeder to work with any foil rolls, including ours. These 100 foot rolls of foil are on 1/2 cores, and the maximum inside diameter of these new tubes is 1 3/8,” so these 95 foot rolls will fit inside the tubes and work with the auto foil feed system. If you already have a canister replacement method for Kingsley’s auto foil feeder, you should order this package without the canister tube (eBay item number 291094476992). ORDERING THE RIGHT FOIL This foil will work on virtually any hot stamping machine at about 250°, but if you want to use it in an auto feed foil system, you will need to do a little research into your machine and order foil accordingly.If you have a Kingsley machine, you can take advantage of my research, explained here. Kingsley developed 3 distinct foil feeding systems through its production history, detailed below.1. IF you have a Kingsley M-50 you are likely using the canister system. For many years Kingsley rolled its foil on a 1/2″ core and enclosed it in a cardboard canister. The canister was highly protective and most of it is still good even though it may be 50 years old. This listing is for NEW foil for this canister system, but foil in canisters is a thing of the past. So there must be another way to hold the foil; hence the canister replacement tube. If you don’t have one and you want to use Kingsley’s auto foil feeder, you should order this foil package with a canister tube (item number 290853169102. The canister system is explained more fully above.2. IF you have a Kingsley M-60 or M-75 with the EZ FOIL ADAPTER, using the white “dog ears” (that’s what Kingsley called them) to hold the foil. Just request your foil to be rolled onto a 5/8″ core; there’s no extra charge for this service and a re-usable set “dog ears” will be supplied with your order. By the way, “dog ears” are no longer in production, so guard them with your life.3. IF you have a Kingsley M-101 with the EZ FOIL ADAPTER, this foil on a 5/8″ core (as in #2) will work in your system, but your machine is capable of a 4 inch wide imprint, and you may prefer to order 4″ wide foil (see eBay item number 290327881480).4. IF you have a Kingsley M-101 that has the 1/2″ rod with the spring loaded end cap for foil feeding, and you need 4 inch wide foil, please see eBay item number 290327881480, and tell us you want it on 1/2 inch core. If 3 inch wide foil is sufficient, just order from this current listing. IMPORTANT LITTLE TIDBITS ABOUT FOIL AND HOT STAMPING 1. THICKNESS Foil comes in varying thicknesses (just like Scott’s Big Roll versus Cottonelle); for example, brilliant foil is generally thinner than pigment foil (gloss or matte colors). In fact a 100′ roll of most older pigment foil will not fit into the canisters like a 100′ roll of brilliant foil will. So pigment foil was normally sold in rolls of 35′ to 50′, which will fit in the canisters. So, when you receive foil in different sized rolls, it does not mean they are in different lengths, or that you are not getting 35 feet. Once in a while, you will get a double roll (like Charmin) because even though you ordered two 35′ rolls, I had a 100′ roll (that will still fit in the canister) ready to go, so that’s what you’ll get (you know, it’s the new math: 2 x 35 = 100). 2. FINISH Terms used to describe the finish on the foil can be very confusing; this confusion is heightened by the producers who often seem to toss around their decriptions like a juggler. In an attempt to stay on the same page with our buyers, we use the old Kingsley terms for these finishes. And they are: Brilliant – the brightest, shiniest finish. This has the most glare and reflection, like chrome or gloss wall paint. The foil is so shiny and reflective that you cannot see into it. Metallic – slightly less bright and reflective, like a gold Cadillac. The foil’s surface seems to have some depth to it. Kingsley produced gold, silver, red, green, blue, copper and purple in both brilliant and metallic finishes. To many folks, “metallic” has come to mean brilliant, and while that may be a perfectly legitimate use of the term in some circles, it won’t be here. Satin – still less bright and less shiny, but with a rich inviting depth (wow, I can’t believe I’m saying stuff like this). Matte – like flat wall paint with virtually no shine. Frequently, there is not a lot of distinction between matte and satin. Gloss – like high gloss wall paint, but not as shiny as brilliant foils 3. COLORS And then there is all the fun with color names. You know: “I ordered magenta and you sent me fuschia.” Well, to my knowledge, I haven’t done such a dastardly thing, but I certainly could have. And I confess that I have sent pink instead of dusty rose. Is that really California blue? And what is the difference between hot pink and cerise? Or between turquoise, teal and aqua, especially if they are brilliant. And don’t Google it to figure it out; I can’t get along without Google, but I no longer try to determine what color turquoise is by Googling it. Once was enough. Again, I will use the old Kingsley color chart as much as possible, so if you have one, hang on to it. Let’s just assume that I will do my best to fill your order for specific colors and I will hope you are pleased. And if not, well let’s talk about it. Nuff said? 4. WIDTHS Foil widths can be exciting too. First, of all be sure to notice the width of the foil in the description; I try to get that information into the title lines and headers. I offer foil in 2″, 3″ and 4″ widths here, but Howard produced foil in 3 1/2″ and 5″. Occasionally you only need 1″ wide foil, so using a 3″ wide roll would sure waste a lot, so I also have 1″ wide a 1 1/2″ wide rolls of many of the colors. When you order 3″ foil, you might get a roll or two that are 2 3/4″ (in which case I will always make it up to you, with extra length or some other compensation), and you might get a 3 1/2″ roll of Howard foil (in which case, you can just consider it a bonus). 5. LIFE Foil life is very important to me and to you. I want you to be able to order with the confidence that you are getting good viable foil from me. In the case of Premium foil, like in this listing, it’s not much of a factor; it’s all brand new foil, but because it is very thin, it can be hard to deal with in cutting and rolling. You will probably find an occasional wrinkle, especially if the foil came from near the 1″ core that it came on originally, but it will be very minimal, and I apologize for missing it. In new foil, the wrinkle usually doesn’t mean the foil material came off, so it will still imprint just fine. Recently, I have switched to a new manufacturer of certain foils because their product is virtually wrinkle free. It is in the old Kingsley foil where there might be a problem. The Kingsley canisters protected the foil; I have found foil from the 1940s that is still good. But it depends more on the storage conditions. I have several little tricks I use to determine if the foil is good down in the roll. Obviosuly, I can’t unroll every roll to check it, but I do carefully examine the foil to make sure you are getting foil you can use. And if I messed up, please let me know and I will replace the roll. 6. CORES Oh yes: foil cores. The core is that little cardboard (occasionally plastic) tube in there that the foil is rolled up on (again, like Angel Soft – boy, that simile has a life, huh?). Well this consideration is dealt with in the previous section, so I’ll just ask you to please not forget to let me know if you have particular core requirements. 7. SUBSTRATES There is probably a foil produced by some manufacturer for imprinting just about any surface except metal and glass. The surface material you are trying to imprint is referred to in the industry as the substrate. Some foils are better for paper, some for leather, some for wood and some for plastic, but which is which? Generally, this is determined by trial and error, although most producers designate the recommended substrates for each of their foils. Of course, I want to ship you foil that will work on your substrates, and if the foil I have sent to you doesn’t work well on your material, just send it back and I will try to find you some foil that will work. I will share the postage expense with you to keep your costs down as much as possible. Please don’t keep foil that you can’t use and/or give me negative feedback. Let me help you find the foil you need. Generally it will be helpful if you tell me in advance when you are trying to imprint a certain substrate. Let’s keep the communication lines open, OK? 8. TEMPERATURE Most normal hot stamping takes place at about 250°, plus or minus 20°. As far as I know, the recommended temperature for imprint any of the nearly 90 colors listed above is 250°; at least that would be the starting point. At our store, we keep our thermostat set at 250° and virtually never change it. But there is foil that won’t imprint at 250°; it requires a temperature that is higher than the desktop Kingsley machine can produce. Some of this is for wire marking that takes place at 350° or higher. It is virtually impossible to distinguish low temp foils from high temp foils, so some high temp foils invariably creep into the mix with low temp foils. Again, if you receive foil from me that won’t imprint at 250°, please don’t just give me negative feedback. Let me replace it. 9. DWELL Another factor in determining the quality of an imprint is the dwell time, how long the printhead stays down on the imprint. Normally, the suggestion is to bring the printhead down and move it back up instantly. Here is another factor in the imprint process where practice makes perfect. Occasionally, it is necessary to leave the printhead down for an extra split second in order to obtain a full imprint. 10. PRESSURE The last factor to consider, when imprinting a substrate, is pressure. Probably the most important consideration is the nature of the surface, whether it is a napkin, cardboard, soft leather or wood. For example, soft leather will usually require a lighter touch, while a hard cardboard needs to be pressed very firmly. NEW TECHNOLOGIES I have used Kingsley machines for hot stamping now for 40 years and I have rebuilt more than 500 of these machines which have been sold on eBay and elsewhere, so I’m quite knowledgeable about their capabilities. I have also gotten quite familiar with the specifications of the various foils offered out there. But in the last few years two new processes using foil have appeared: Using laser printers and laminators to produce images with foil and using a polymer plate to produce images. I do not know much about these processes nor if the foils I offer are appropriate for them, but I am open to receiving information. My special congratulations to you if you read through all of this. Thanks. Dennis C Kelly

Frequently Asked Questions About Kingsley Hot Stamping Foil Special Effects – 3″ x 95′ – 3 Roll pack + Canister in My Website

giainganvon.com is the best online shopping platform where you can buy Kingsley Hot Stamping Foil Special Effects – 3″ x 95′ – 3 Roll pack + Canister from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Kingsley Hot Stamping Foil Special Effects – 3″ x 95′ – 3 Roll pack + Canister on giainganvon.com?