Truck Under Bed Fuel Tank, Pickup Box, Gas Tank, Fits Chevy C10 1973-87

$637.03 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Oyster Bay, New York, United States
Ships to: US,
Item: 386827854422

eBay Truck Under Bed Fuel Tank, Pickup Box, Gas Tank, Fits Chevy C10 1973-87 Description 1973-87 Chevy C10 Truck Under Bed Fuel Tank, Pickup Box, Gas Tank Sku # 91140246Mfr. Part # 91140246 Condition New Sold Each 1973-87 Chevy C10 Truck Under Bed Fuel Tank, Pickup Box, Gas Tank DetailsInfo Relocates fuel tank from driver’s side frame rail to under pickup bed Safer fuel tank location, as stock tank is vulnerable in a T-bone style collision TIG welded .090-inch thick aluminum construction for strength with light weight Features industry standard five-bolt fuel level sender mounting pattern Rear mounting configuration provides better weight balance and enhances traction Much safer fuel storage, as fuel is no longer close to the driver’s side frame rail Tank features AN6 pickup tube and 1/4-inch NPT vent port for carbureted applications Fits both two-wheel drive C10 and four-wheel drive K10 truck models 20 gallon fuel capacity (factory tank is 16 or 20 gallon depending on year and bed length) Not a universal fuel tank; dimensions, and mounting flanges specific to 73-87 Chevy truck frames Make Your 1973-1987 Chevy Truck Safer by Relocating the Fuel Tank By the time Chevrolet’s much loved C10 pickup truck hit the 1970s and into the ’80s a lot of safety updates had been made to the third generation C10 truck. Standard disc brakes, three-point seatbelts, radial tires, and more were the norm. That said, there is always room for improvement, and one such upgrade for these square body C10s is to relocate the driver’s side frame rail mounted fuel tank. While previous generation C10s and even earlier model Chevy trucks featured a fuel tank in the passenger compartment behind the bench seat, the square body’s fuel tank location could certainly be seen as an improvement. However, it has been noted over the years that it’s mid-chassis placement on the outside of the driver’s side frame rail often means the factory tank can be ruptured during a traditional “T-bone” style collision. Moving the fuel tank to under the bed of the truck and behind the rear axle provides for a safer mounting location (rear impacts are often far less severe than a T-bone collision) between the rear frame rails. Frame Specific Dimensions Ensures a Perfect Fit Under the Bed of Your Pickup Moving the fuel tank to the rear of your pickup under the truck’s pickup box/bed floor provides several benefits. The most obvious of course is removing the liquid fuel storage from just under the driver’s side of the passenger compartment where a ruptured tank, separated fuel line or filler hose in an accident can quickly engulf the cab area with flames. Moving the fuel tank to the rear not only provides a higher level of safety but places a good bit of weight at the rear of the pickup, which aids in traction. On average you’re looking at roughly 100 pounds of weight with a full truck bed fuel tank. Relocating the fuel tank also provides room under the driver’s side cab area for running boards, rock sliders, custom exhaust, or to run your fuel and brake lines. We have designed our under bed aluminum fuel tanks to mount between the frame rails for a perfect fit behind the rear axle assembly. This is not a universal fuel tank requiring modification to fit your truck. The 27-inch wide truck bed gas tank is built from .090-inch thick aluminum sheet and TIG welded for a strong, yet light assembly. An internal full height baffle reduces fuel slosh and keeps the pickup tube immersed in fuel. We provide generous 3-inch wide and 5-inch long mounting flanges made from 1/8-inch aluminum on each end (for a total width of 33 inches) of our aluminum fuel tank that fit within your truck’s frame rails. Final placement is directed via the factory rear frame rail angle and all you must do is drill your own mounting holes and bolt the tank in (hardware not supplied). Available For Carbureted or EFI applications in Bare Tank or Full Kit Versions As you improve your classic pickup with things like replacement gauges and even fuel injection, a truck bed gas tank such as our under bed aluminum fuel tank will certainly help with these upgrades as well. Using a standard 5-bolt fuel level sender mounting hole with 10-24 threads, you can install any compatible fuel level sender for your new instruments. Or, if you wish to keep the original fuel level gauge you can order our and our so that your stock gauge will work properly. Our carbureted truck bed fuel tank features an AN6 pickup fitting with a 1/4-inch NPT female port for your tank vent. The vent fitting may also be used for a fuel return line for carbureted applications using an electric fuel pump and regulator, or for a frame rail mounted EFI pump, but a vented fuel filler cap will be required. The 1-1/2-inch diameter filler neck uses standard filler neck hose and allows you to install your choice of fuel filler cap/door in the floor of your truck’s bed. A complete is available as well, which includes fuel filler assembly, filler neck hose, sending unit, and more. For fuel injection retrofits we offer an designed to work with our 255 lph submersible . So, whether you’re running a carb or the latest EFI system in your classic 73-87 Chevy truck, we have the Chevy truck gas tank retrofit for you to keep you safe and moving down the road. Installation Tips Measures 27″ x 17-1/2″ x 9-1/2″. The actual tank is 27″ wide, the mounting tabs are 3″ on each side of the tank. The total width of this tank is 33″ with the mounting brackets. Mounting brackets are 4″ down from top and 5-1/2″ up from bottom of tank and 5″ wide. The forward two mounting brackets feature a 13 degree angle to match the frame rail. 1/4″ female NPT thread for vent hose/fitting (we suggest our ) Male AN6 fitting affixed to a pick-up tube threaded into tank with 3/8″ NPT threads Convert the AN6 tank fitting to 3/8-inch push on hose with our Sender mounting hole uses 10-24 thread screws Recommend between tank and frame due to frame flexing Shipping Policy We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return Policy You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging Payment Policy We accept payment by any of the following methods: PayPal, Credit cards, Google Pay Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact us If you have any queries, please contact us via eBay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping with @BestParts

Frequently Asked Questions About Truck Under Bed Fuel Tank, Pickup Box, Gas Tank, Fits Chevy C10 1973-87 in My Website

giainganvon.com is the best online shopping platform where you can buy Truck Under Bed Fuel Tank, Pickup Box, Gas Tank, Fits Chevy C10 1973-87 from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Truck Under Bed Fuel Tank, Pickup Box, Gas Tank, Fits Chevy C10 1973-87 on giainganvon.com?