Viper Keyless remote EZSDE1485 car starter transmitter keyfob 485T alarm entry

$62.13 Buy It Now or Best Offer
free,30-Day Returns

Seller Store u.s.autoparts
(15884) 97.7%,

Location: Wellsboro, Pennsylvania
Ships to: US,
Item: 226265651794

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Non-Domestic Product:No
Other Part Number:1500 HF 2000 HF 3000 HF EZSDE1485 DT6D DT6D-1 DT4
Warranty:60 Day
Sidewinder 6500 HF, 7000 HF:Viper 550 HF, 600 HF, 700 HF, 800 HF
PRE-OWNED AFTERMARKET REMOTE K:KEYLESS ENTRY FOB ALARM REPLACEMENT TRANSMITTER CL
Color:Black
Custom Bundle:No
Manufacturer Part Number:EZSDEI485 FCC ID FCCID 485T green led key fob clicker beeper
Placement on Vehicle:Front
Modified Item:No
California Prop 65 Warning:N/A
ViPER:ViPER
WILL WORK WITH: Automate 7 HF:Valet 450R Python 1500 HF, 2000 HF, 3000 HF
2-Way Paging:No
Type:Wireless
Interchange Part Number:485T 485 T Viper 550 HF 600 700 800 450R 434 Mhz
Unit Type:Unit
Part Brand:DEI
STOCK#::610 LED color: Green
directed dei python oem factory transmitter 4 button fab phob:directed dei python oem factory transmitter 4 button fab phob
Surface Finish:4 BUTTONS I, II, III, IV green led
Features:Remote Start,ready to program GREEN LED TESTED works 100% battery installed
Country/Region of Manufacture:Unknown
Unit Quantity:1

This item is pre-owned – it will work like new once programmed to your vehicle One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement FUNCTIONS AT 100% TESTED & GUARANTEED Viper / Python / Automate / Hornet / DEI / Sidewinder FCC ID: EZSDEI485 (Alternate Spelling: EZSDE1455) Part #: 485TFrequency: 433 – 434 MHz LED color: Green 4 buttons Compatible with the following systems: Python 1500 HF 2000 HF 3000 HF Sidewinder 65000 HF 7000 HF Viper 550 HF 600 HF 700 HF 800 HF Python 400 HP 440 HP 450 ESP 460 HP 500 HP 625 HF Automate 7 HF Valet 450 R Programming Instructions: In order to enter Learn Routine, the Valet /program push button must be plugged into the main brain’s BLUE 2 pin port (Look for a small black push button located under the drivers dash or drivers kick panel somewhere). 1) Open a door and make sure the dome light is on. 2) Turn the ignition on to the RUN position or you may also start car. 3) Within 15 seconds press and release the Valet /program push button to select the channel you wish to program. For example, press and release once for channel 1 (arm/disarm channel). For Channel 2, press and release twice (trunk release). For Channel 3, press and release three times (remote start). Press and hold the Valet /program push button once more. You should get a confirmation chirp/horn-honk or a flashing LED light (If installed). If you do not get a chirp/horn-honk the alarm may have a jumper in the alarm that has the programming feature turned OFF (disabled). 4) Once the alarm chirps/horn-honks keep holding the Valet /program push button. 5) Press the button on the transmitter that you would like to control the selected receiver channel. A chirp/horn-honk will confirm that the code has been learned. If programming more than one transmitter repeat step 5. Old transmitter codes will be dropped only if programming 4 new transmitters. 6) Once the code(s) are learned, the Valet /program push button can be released. Learn Routine will be Exited if: Ignition is turned off Door is closed Valet /program push button is pressed too many times More than 15 seconds elapses between steps One long chirp/horn-honk indicates that Learn Routine has been exited. 100% Guarantee Remote Shipping / Return Policy 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system.

Frequently Asked Questions About Viper Keyless remote EZSDE1485 car starter transmitter keyfob 485T alarm entry in My Website

giainganvon.com is the best online shopping platform where you can buy Viper Keyless remote EZSDE1485 car starter transmitter keyfob 485T alarm entry from renowned brand(s). giainganvon.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Viper Keyless remote EZSDE1485 car starter transmitter keyfob 485T alarm entry on giainganvon.com?